Wednesday, January 10, 2018 - 03:17 AM UTC
Hornby is to release a 4-6-0 Holden B12 LNER in OO/1:76 this coming March
Allocated throughout East Anglian sheds, the S69 saw sterling service hauling the Liverpool Street-Norwich mainline trains, as well as the Harwich Boat Trains, Cambridge and Great Yarmouth services. At Grouping in 1923, the S69 became classified as the LNER B12 and extended its range to Doncaster, Leeds and Manchester. The LNERís plans for 2-6-4T engines to operate services to Southend were abandoned following issues with the typeís stability and so a further ten B12 locomotives were ordered from Beyer, Peacock and Co to fill the void, the design being fitted with vacuum ejectors, Lenz poppet valves and dual air and vacuum brakes and classified as class B12/2. With large scale upgrading to the permanent way by the LNER, it at last became possible to increase the weight of locomotives and so a larger, round topped boiler pattern, with a bigger superheater was introduced, along with modified valve gear, resulting in a new B12/3 classification. Further modifications were carried out to the boilers of nine of the twenty five Scottish engines, this resulted in the final variation of the class, the B12/4.During 1944, due to their wide route availability, a number of the B12/3s were utilised to work on ambulance trains hauling air braked, American built stock, mainly in the West Country. To improve the loading gauge, the footsteps were cut back and holes cut into them, making them instantly recognisable in later years.
Seventy two locomotives entered British Rail service at Nationalisation in 1948, further withdrawals taking place at regular intervals until the last locomotive, No.61572, was withdrawn in September 1961 and it is this engine that is preserved at the North Norfolk Railway. Locomotive 8527 was built at Stratford and entered traffic at Cambridge in August 1914, where it remained until October 31, 1927 when it was transferred to Ipswich. In April 1928, 8527 moved to Parkeston, followed by a brief move to Norwich in March 1929 before heading back to Cambridge in April that year. The ACFI feed was fitted in January 1932 at Stratford, being removed as the locomotive was rebuilt to a B12/3 in January 1935.
This future release from Hornby will be DCC Ready, has a 5 Pole Skew Wound Loco Drive and has NEM Couplings
R3544 - 4-6-0 Holden B12 LNER - OO/1:76
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on RAILROAD MODELING
THIS STORY HAS BEEN READ 631 TIMES.