login   |    register
RB Productions [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

Tool Review
Flip-R5 PE Bending Tool
  • RB_Flip_R5_5

by: Rowan Baylis [ MERLIN ]


Originally published on:
AeroScale

As shown recently in Aeroscale's News section, Rad Brinzan has somehow found time, while continuing to produce his exceptionally detailed conversion sets and master-patterns for kits such as MDC's imminent 1/32 scale Arado Ar 234, to develop a rather unique PE Bending tool - the Flip R-10... now, here's a look at its "baby brother", the Flip R-5.

The Flip R-5 arrives in a neat little flat-pack pouch and it's immediately apparent that it is very different from a conventional PE Bending tool; this tool is photo-etched itself! It's produced on a single fret of heavy-duty steel and requires just a few minutes' clean-up and assembly before it's ready for use. The Flip R-5 comprises three parts:

A base with fold-up ears, which double as hinges and angle guides.
A bending attachment, which clips into the hinges and is used to make the fold.
A bending guide, which holds the part to be folded in place and has a straight edge one side and a series of tongues on the other.

Assembly is very straightforward - something made even easier by Radu's excellent set of instructions which are illustrated with clear photos. The only point to be careful of is folding the ears/hinges - you must follow the instructions precisely, because if you try to re-fold them, you risk weakening the metal sufficiently to break it. So don't rush it - read the instructions - and you'll have the Flip R-5 ready for use in 5 minutes after opening the packet.

But it's so small...
With the Flip R-5 assembled, it's a surprise to see just how compact it is compared with my existing PE Bending tool! Detractors will no doubt point this out as a limitation - which it obviously is for the occasional really large job - but, with a maximum fold of 5cm, the Flip R-5 can easily handle 95% of the folds I need to make as an aircraft modeller. In fact, its small size is also a major advantage in making the Flip R-5 ideal as part of a travelling tool kit.

In use, apart from its compactness, the Flip R-5 has a couple of other worthwhile advantages over it's heavyweight counterpart:

The bench-press style folding plate and side angle guides make it really easy to make accurate folds at any angle up to 90.

The photo-etched bending guide has 10, 7.5, 5, 3, 2 and 1mm tongues - the 1mm tongue is about 4x finer than the smallest guide on my existing PE Bending tool, so it's almost heaven-sent for tackling some of the miniscule parts appearing in the latest PE upgrade sets.

In action...
The obvious test for the Flip R-5 was to fold a box, so grabbed a couple from Eduard's recently reviewed Follow Me Jeep set. The Flip R-5 couldn't have been simpler to use - with the part to be folded lined up under the bending guide - fingertip pressure was enough to hold it securely - it was simply a question of raising the hinged bending attachment to the vertical position. Hey presto! - one fold done, turn the part, make the next fold and so on... Very quick, very easy and very precise.

For heavier folds, Radu suggests clamping the part under the folding guide with a standard office-supplies "bulldog clip", but I have to say I think this is going to be the exception rather than the rule - for virtually any pre-marked PE set, fingertip pressure will suffice.

Radu has produced his own video to illustrate how simple it is to use a Flip folding tool - in this case the larger R-10. Obviously, he's probably the most skilled person on the planet at using a Flipl LOL! - but the video really does give a valid impression of just how quick and easy the Flip R-5 proves to be in practice: Video

Conclusion
The Flip R-5 is an excellent tool that deserves to be part of the kit for any modeller who delves into the "black art" of Photo-Etched parts. If you already have a PE Bending tool, you'll find the Flip R-5 or its larger brother, the Flip R-10, has a couple of significant "twists" that make it a very worthwhile addition to the arsenal, while newcomers to PE will find it a very cost-effective first tool (and you may never need look beyond it for the majority of tasks). For the modeller on the move, the Flip R-5 scores hands down over many bulkier and heavier tools - the old "Do I pack it or not?" question is a thing of the past. Highly recommended.

The Flip PE Folding Tools are available directly from Radu Brinzan via his E-Bay shop.

Alternatively, they are also distributed by the following on-line stores:

Net Merchants
MDC
Buffie's Best

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
SUMMARY
Highs: Cheap, light, easy to use and accurate.
Lows: It can't handle the occasional large PE job.
Verdict: Its price makes in ideal first tool for PE use or addition to the experienced user's toolkit. Its compactness is perfect for travelling modelling tool-kits.
Percentage Rating
95%
  Scale: Other
  Mfg. ID: RB-T002
  Suggested Retail: 12.50 €
  Related Link: 
  PUBLISHED: Oct 25, 2007
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.88%
  MAKER/PUBLISHER: 93.70%

Our Thanks to RB Productions!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Rowan Baylis (Merlin)
FROM: NO REGIONAL SELECTED, UNITED KINGDOM

I've been modelling for about 40 years, on and off. While I'm happy to build anything, my interests lie primarily in 1/48 scale aircraft. I mostly concentrate on WW2 subjects, although I'm also interested in WW1, Golden Age aviation and the early Jet Age - and have even been known to build the occas...

Copyright 2018 text by Rowan Baylis [ MERLIN ]. All rights reserved.



Comments

Looks like an interesting little gizmo, especially for the smaller scale builders.
OCT 25, 2007 - 12:31 PM
Now this is more like it (and it's bigger brother) I would never have bought one of those expensive folding machines, but this really dose seem like a simple easy and cheapish way of carrying out this task Mal
OCT 26, 2007 - 08:00 PM
   

What's Your Opinion?


Photos
Click image to enlarge
  • RB_Flip_R5_1
  • RB_Flip_R5_2
  • RB_Flip_R5_3
  • RB_Flip_R5_4
  • RB_Flip_R5_6