login   |    register
Ships by Class/Type: Battleships
Topics from the Dreadnaught era to modern day.
Hosted by Steve Joyce
The King! - HMS King George V, May 41
JJ1973
#345
Visit this Community
Niedersachsen, Germany
Member Since: August 22, 2011
entire network: 1,578 Posts
KitMaker Network: 3 Posts
Posted: Monday, October 26, 2015 - 10:25 AM UTC
Hi Russ,

good to see you're back as well!!

Patience and not getting frustrated whenever progress is slow is most important. And progress may be slow because of some tiny, fiddly parts, some smaller or bigger mishaps at the yard or simply because you don't have the time to sit down at the bench...the latter one can be very frustrating, too.

Very nice update, the small boats look way to kind as if the could have anything like revenge on they mind but than agin, still waters... just kidding.

They should look great on your King!! looking forward to see more!

Cheers ,

Jan
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Member Since: September 03, 2013
entire network: 1,099 Posts
KitMaker Network: 5 Posts
Posted: Monday, October 26, 2015 - 04:57 AM UTC
Hi Russell,

At LAX airport re-reading this blog from the beginning.
It's a great build and the effort on the detail is superb.
Keep the faith, you'll get there.

cheers

Michael
RussellE
#306
Visit this Community
Victoria, Australia
Member Since: June 27, 2010
entire network: 2,662 Posts
KitMaker Network: 21 Posts
Posted: Monday, October 26, 2015 - 02:42 AM UTC
Thanks Si and Dave.

hope to have the boats finished this week.

Good to have your support guys, as this build has become a real slog
rolltide31
#377
Visit this Community
Texas, United States
Member Since: June 27, 2010
entire network: 1,364 Posts
KitMaker Network: 49 Posts
Posted: Sunday, October 25, 2015 - 04:07 PM UTC
Russell,

Great work on the boats, they are coming along nicely and will add a great deal to your magnificant work.

Looking forward to seeing them mounted on the King.

Dave
RedDuster
Visit this Community
England - South East, United Kingdom
Member Since: March 01, 2010
entire network: 5,973 Posts
KitMaker Network: 42 Posts
Posted: Sunday, October 25, 2015 - 03:36 PM UTC
Hi Russ,

Nice wok on the boats so far.

Looking forward to seeing more progress.

Keep up the good work,

Cheers.

Si
RussellE
#306
Visit this Community
Victoria, Australia
Member Since: June 27, 2010
entire network: 2,662 Posts
KitMaker Network: 21 Posts
Posted: Sunday, October 25, 2015 - 02:15 PM UTC
Hi Jan!

Well "revenge of the boats" sounds like an excellent title for a sequel! Though, like most sequels, its not a patch on the original and the boats are proving a lot easier than the pom poms...




I still need to finish the 27' whalers and fit the davits, rudders and props to some but taking my time

Thanks for looking
JJ1973
#345
Visit this Community
Niedersachsen, Germany
Member Since: August 22, 2011
entire network: 1,578 Posts
KitMaker Network: 3 Posts
Posted: Friday, October 23, 2015 - 10:22 PM UTC
Russ,

the PomPoms were really worth the effort!! They look great on your fantastic King!

I hope you're not into another horror Movie - The revenge of the Boats or something like that??

Looking forward to see more!!

Cheers,

Jan
RussellE
#306
Visit this Community
Victoria, Australia
Member Since: June 27, 2010
entire network: 2,662 Posts
KitMaker Network: 21 Posts
Posted: Sunday, October 11, 2015 - 08:12 AM UTC
Thanks guys!

appreciate the kind words.

Working on ship's boats now...
surfsup
Visit this Community
Queensland, Australia
Member Since: May 20, 2010
entire network: 934 Posts
KitMaker Network: 15 Posts
Posted: Thursday, October 08, 2015 - 03:29 PM UTC
They are really worth the effort my Friend. Turned out beautifully.....Cheers Mark
Fordboy
Visit this Community
Auckland, New Zealand
Member Since: July 13, 2004
entire network: 2,160 Posts
KitMaker Network: 445 Posts
Posted: Thursday, October 08, 2015 - 03:38 AM UTC
Ahoy Russell

What a superb effort indeed.

I am glad you have not given up.

Inspires me (or shames me actually)to get back into my Airfix E-Boat again.

Cheers


Sean
RedDuster
Visit this Community
England - South East, United Kingdom
Member Since: March 01, 2010
entire network: 5,973 Posts
KitMaker Network: 42 Posts
Posted: Wednesday, October 07, 2015 - 11:52 PM UTC
Hi Russ,

What Dave said, pom poms were well worth all the effort you put in.

Si
rolltide31
#377
Visit this Community
Texas, United States
Member Since: June 27, 2010
entire network: 1,364 Posts
KitMaker Network: 49 Posts
Posted: Wednesday, October 07, 2015 - 05:20 PM UTC
Russell,

The POM POMs look greated added. Really brings her to life seeing her AA compliment. Looking forward to seeing more.

Dave

RussellE
#306
Visit this Community
Victoria, Australia
Member Since: June 27, 2010
entire network: 2,662 Posts
KitMaker Network: 21 Posts
Posted: Wednesday, October 07, 2015 - 03:35 PM UTC
Pom Poms painted and shipped!


can you spot the bug?


Thanks for looking
RussellE
#306
Visit this Community
Victoria, Australia
Member Since: June 27, 2010
entire network: 2,662 Posts
KitMaker Network: 21 Posts
Posted: Tuesday, September 29, 2015 - 03:50 PM UTC
Thank you guys!
I must admit I was close to throwing in the towel a few times
I'll definitely be dry fitting one of the spares to make sure they fit, before painting. Thank you for the tip, Jan
There could be a happy ending to the horror movie, but it could spawn many sequels!!! really tempted by all those lovely red airfix boxes that rapidly accumulating in my stash at the moment
JJ1973
#345
Visit this Community
Niedersachsen, Germany
Member Since: August 22, 2011
entire network: 1,578 Posts
KitMaker Network: 3 Posts
Posted: Tuesday, September 29, 2015 - 09:03 AM UTC
Russ,

main difference between a horror movie and "The night of the PomPoms" is that the latter one has an happy end!!

Great work mate, I can just second everything that was said above!! They are looking fantastic, and I know what you've gone through from my REPULSE build - but I had only three of them.

Well, our hobby must make one slightly nuts sometimes, I'll defacing the horror movie here myself again shortly, but only an abbreviated version - two are needed for BELFAST, and I do have some spare Eduard pieces, so I will go for them instead of the WEM ones (apart from that WEM is out of scale anyway, as you were proofing earlier). Watching a horror movie for the second time should be easier - you should remember when the most horrible scenes are....

I hope your PomPoms will fit on the King - I remember from REPULSE that they did not at the first dry fitting - the guns were sitting to far aft on the cradle, so part of the quite delicate aiming / sight devices of the gun were gotten caught by the ship's superstructure - some kind of embarrassment you can guess... I ended up removing the guns from the cradle again, then shortening the 'spent ammo slide' by a bit, cutting it's sides and bending it so that the forward part would be shorter. This allowed the whole cradle to move forward a bit. Happily I did my dry fitting before painting.

Again, great job and I am looking forward to see your fantastic King growing

Cheers ,

Jan
surfsup
Visit this Community
Queensland, Australia
Member Since: May 20, 2010
entire network: 934 Posts
KitMaker Network: 15 Posts
Posted: Tuesday, September 29, 2015 - 06:57 AM UTC
That is some beautiful work you have done Russell. Really enjoying your Build.....Cheers Mark
RedDuster
Visit this Community
England - South East, United Kingdom
Member Since: March 01, 2010
entire network: 5,973 Posts
KitMaker Network: 42 Posts
Posted: Tuesday, September 29, 2015 - 01:31 AM UTC
What the guys said,

great job on the pom poms Russ, they will be splendid under a coat of paint.

Cheers

Si
rolltide31
#377
Visit this Community
Texas, United States
Member Since: June 27, 2010
entire network: 1,364 Posts
KitMaker Network: 49 Posts
Posted: Monday, September 28, 2015 - 07:17 PM UTC
Russell,

I have to echo what Tim said on both accounts. Amazing tenacity in pursueing what appears to be perfection with the POM POMs. Amazing work.

Dave
TimReynaga
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
Visit this Community
California, United States
Member Since: May 03, 2006
entire network: 1,793 Posts
KitMaker Network: 14 Posts
Posted: Monday, September 28, 2015 - 05:23 PM UTC
Russell,

I admire your ability to stick to what can only have been a tedious task, but those pompoms look absolutely fantastic! No wonder this hobby makes us all a little nuts at times....

RussellE
#306
Visit this Community
Victoria, Australia
Member Since: June 27, 2010
entire network: 2,662 Posts
KitMaker Network: 21 Posts
Posted: Monday, September 28, 2015 - 04:19 PM UTC
Update 29th September, 2015

At last the horror movie that is "The night of the Pom Pom" is over! Here we have four u-beaut, state of the art pom poms! They're not perfect, well, not to my eye anyway, but you know what? I'm gonna live with them.

First up, you need to remove the ammo boxes from the molded components

then make one of these per pom pom

then you need to use 0.1mm styrene on either side to shim the plastic part to fit the brass

then you need to turn these

into these

making four per pom pom

I'm making all 6 pom poms provided in the Ed PE, so a total of 24. This is because i'm going to use the best four.
Then you fold up these

and these ammo belts

and of course, the ammo belts are handed, so another lot

and then you put them all together to make these.

And these-down to five pom poms as one went pear shaped

Next you assemble them to the central part prepared earlier

and then the base

giving you this



next you need to make some of these


and attach them like so






so there you have it... 2 months of my modelling life given over to four little pom poms... Am I burnt out i hear you say. Why, yes sir! and a little mad methinks... thanks again for looking.
RussellE
#306
Visit this Community
Victoria, Australia
Member Since: June 27, 2010
entire network: 2,662 Posts
KitMaker Network: 21 Posts
Posted: Sunday, August 02, 2015 - 03:13 AM UTC

Quoted Text

Hi Russell,

Very nice work with the etched pompom bases.

They will be well worth the effort.

Cheers.

Si



Thanks Si. Definitely not easy to build though

Quoted Text

Russell,
The pom-poms look great. I must admit I have avoided building late WWII ships so I don't have fiddled with all those little barrels

cheers

Michael



not such a silly move Michael


Quoted Text

Very nice work, Russ!

The Eduard PomPoms are really great, I have been using them for my Repulse as well. But they do need some modification - I think the actual gun was placed to far aft, but I would have to double-check on my own build log...

Great to see your King progressing as well!!

Cheers

Jan


Thanks Jan. your pom poms were a work of art. Only hope I do half as good as yours though

Quoted Text

Those little ammo boxes, if you had sneezed... catastrophe. Great progress Russel.

Bryan


True that Bryan good thing there's a couple of spares

Family commitments kept me away from the bench over the weekend, but hopefully I can spend a bit of time tonight and keep adding to the pom pom insanity fund
Blespooky
Visit this Community
Tel Aviv-Yafo, Israel
Member Since: June 03, 2014
entire network: 277 Posts
KitMaker Network: 4 Posts
Posted: Friday, July 31, 2015 - 11:46 PM UTC
Those little ammo boxes, if you had sneezed... catastrophe. Great progress Russel.

Bryan
JJ1973
#345
Visit this Community
Niedersachsen, Germany
Member Since: August 22, 2011
entire network: 1,578 Posts
KitMaker Network: 3 Posts
Posted: Friday, July 31, 2015 - 09:06 PM UTC
Very nice work, Russ!

The Eduard PomPoms are really great, I have been using them for my Repulse as well. But they do need some modification - I think the actual gun was placed to far aft, but I would have to double-check on my own build log...

Great to see your King progressing as well!!

Cheers

Jan
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Member Since: September 03, 2013
entire network: 1,099 Posts
KitMaker Network: 5 Posts
Posted: Friday, July 31, 2015 - 08:01 AM UTC
Russell,
The pom-poms look great. I must admit I have avoided building late WWII ships so I don't have fiddled with all those little barrels

cheers

Michael
RedDuster
Visit this Community
England - South East, United Kingdom
Member Since: March 01, 2010
entire network: 5,973 Posts
KitMaker Network: 42 Posts
Posted: Thursday, July 30, 2015 - 12:49 PM UTC
Hi Russell,

Very nice work with the etched pompom bases.

They will be well worth the effort.

Cheers.

Si