login   |    register
Campaigns: Active Campaigns
Campaigns that are either in planning or underway should be grouped here.
Hosted by John Pereira
Bury My Heart at Stalingrad
canismalus
#465
Visit this Community
Nordrhein-Westfalen, Germany
Member Since: September 12, 2014
entire network: 357 Posts
KitMaker Network: 2 Posts
Posted: Monday, September 16, 2019 - 02:58 AM UTC
Ahhhh, Gaz, so you‘ve gone to the dark side..... I know what you mean by too many campaigns, this year I‘ve been in five at once, which is kind of a challenge to myself but a bit much all at the same time this summer/fall.

I‘ll just keep an eye out on the campaign page for whatever AFV theme you might suggest...and have fun with your Me 262 campaign!

Jerry
GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Sunday, September 15, 2019 - 04:23 PM UTC

Quoted Text

One more thing, Gaz, didn‘t you say something a while ago about an upcoming Tank Hunters campaign? I have a SU-100 waiting in the stash.......



Well, I'm currently enlisted into two armored campaigns hosted by PetBat... So I was gonna wait a while on another armored campaign.

And it is true, I do have an aircraft campaign planned. But it doesn't start until March.

Gaz
petbat
Visit this Community
Queensland, Australia
Member Since: August 06, 2005
entire network: 2,232 Posts
KitMaker Network: 61 Posts
Posted: Sunday, September 15, 2019 - 07:43 AM UTC
He switched allegiance Jerry - He is hosting a Me 262 build....
canismalus
#465
Visit this Community
Nordrhein-Westfalen, Germany
Member Since: September 12, 2014
entire network: 357 Posts
KitMaker Network: 2 Posts
Posted: Saturday, September 14, 2019 - 08:39 PM UTC
One more thing, Gaz, didn‘t you say something a while ago about an upcoming Tank Hunters campaign? I have a SU-100 waiting in the stash.......
canismalus
#465
Visit this Community
Nordrhein-Westfalen, Germany
Member Since: September 12, 2014
entire network: 357 Posts
KitMaker Network: 2 Posts
Posted: Saturday, September 14, 2019 - 08:35 PM UTC
Peter, magnificent work. And again, that‘s a very clean installation of that difficult PE!

Thanks a lot for the campaign and the ribbon, Gaz, and thanks to all who participated.

Jerry
petbat
Visit this Community
Queensland, Australia
Member Since: August 06, 2005
entire network: 2,232 Posts
KitMaker Network: 61 Posts
Posted: Saturday, September 14, 2019 - 02:25 PM UTC
Thanks Guys. Would have been finished earlier, and completed, if not for the wife's accident. She's getting better and can drive herself, so a little more time to finish this properly in coming weeks.

GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Saturday, September 14, 2019 - 01:30 PM UTC
Ok, Everybody!
Let's call this a wrap!

I'd like to thank everyone for their participation, companionship, and motivation.

All of the awards have been placed. If I've missed anyone, or neglected anything, please let me know.

We had some great looking successes.

Happy modelling,

Gaz
d6mst0
#453
Visit this Community
Texas, United States
Member Since: August 28, 2016
entire network: 1,386 Posts
KitMaker Network: 6 Posts
Posted: Saturday, September 14, 2019 - 01:21 PM UTC
Peter,

Very nice work, not over done with the weathering.

Mark
GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Saturday, September 14, 2019 - 01:21 PM UTC
Stellar job, Peter! Congratulations!

Weird that it has no floor. I hope my Tamiya one has a floor.

Gaz
brekinapez
Visit this Community
Georgia, United States
Member Since: July 26, 2013
entire network: 1,857 Posts
KitMaker Network: 94 Posts
Posted: Saturday, September 14, 2019 - 01:19 PM UTC
Good work on the Marder, Peter

I need to build some more early war stuff; the earliest piece I've built lately was from Stalingrad and before that a Marder III from the MTO.

The PE frame on the back would test my patience, though.

Thanks for the campaign, Gaz, and to all who participated. There have been several strong finishers.
petbat
Visit this Community
Queensland, Australia
Member Since: August 06, 2005
entire network: 2,232 Posts
KitMaker Network: 61 Posts
Posted: Saturday, September 14, 2019 - 12:44 PM UTC
a Tad Tardy, but pics in the gallery. Not quite finished, stowage etc to go and will finish the weathering on the tracks when I add to a base.

Added a 'wood' floor from plastic strip. The kit comes with no floor, just open torsion bars and little else. Based on pics, there must be something for crew members to stand on - or they were very tall soldiers that crewed these.

Thanks for Hosting the Campaign Gaz, and your patience with me.




GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Saturday, September 14, 2019 - 09:03 AM UTC
OK folks...

11 hours left!

I'm gonna award those who have completed because in 11 hours I'll be busy.

Congratulations to all who completed their builds!

Happy modelling!
petbat
Visit this Community
Queensland, Australia
Member Since: August 06, 2005
entire network: 2,232 Posts
KitMaker Network: 61 Posts
Posted: Saturday, September 07, 2019 - 08:41 PM UTC

Quoted Text


Peter, your Marder is coming along very nicely - I like the additional detailing and stowage. That etch does look a bit tricky.



Sorry Jerry, missed your reply earlier.

Yes the etch was tricky. The mesh is all separate to the frame, there are small angle parts and bolt heads to add. If I was doing a later version I could have just replaced it with plastic card armour as the mesh was replaced later...
GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Saturday, September 07, 2019 - 07:59 PM UTC
That looks great, Peter!
petbat
Visit this Community
Queensland, Australia
Member Since: August 06, 2005
entire network: 2,232 Posts
KitMaker Network: 61 Posts
Posted: Saturday, September 07, 2019 - 04:29 PM UTC
Just to show I'm not meandering... or malingering. Base coats down, a little weathering and decals on. The kit comes with insignia for the 16th Motorised Infantry Div which were at Stalingrad, but the photos I have do not show these applied to the vehicles ( what you can see as much of them ended up under snow after being knocked out/captured ...)





Vehicle colour is lighter in the pics than it really is...
GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Saturday, September 07, 2019 - 12:58 PM UTC

Quoted Text

Cheers Gaz



Anything for you, buddy!
petbat
Visit this Community
Queensland, Australia
Member Since: August 06, 2005
entire network: 2,232 Posts
KitMaker Network: 61 Posts
Posted: Saturday, September 07, 2019 - 09:06 AM UTC
Cheers Gaz

And apologies to those waiting for the ribbon.....
GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Friday, September 06, 2019 - 11:06 PM UTC

Quoted Text


Quoted Text

Peter,
That looks great so far. Do you need another week?

Jerry,
Thank you for the detailed explanation! I'm going to have to give that a go.

Gaz



...maybe.... well that would be good actually Gaz.



OK... Our new date will be 14 September.
petbat
Visit this Community
Queensland, Australia
Member Since: August 06, 2005
entire network: 2,232 Posts
KitMaker Network: 61 Posts
Posted: Friday, September 06, 2019 - 09:18 PM UTC

Quoted Text

Peter,
That looks great so far. Do you need another week?

Jerry,
Thank you for the detailed explanation! I'm going to have to give that a go.

Gaz



...maybe.... well that would be good actually Gaz.
GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Thursday, September 05, 2019 - 10:13 PM UTC
Peter,
That looks great so far. Do you need another week?

Jerry,
Thank you for the detailed explanation! I'm going to have to give that a go.

Gaz
canismalus
#465
Visit this Community
Nordrhein-Westfalen, Germany
Member Since: September 12, 2014
entire network: 357 Posts
KitMaker Network: 2 Posts
Posted: Thursday, September 05, 2019 - 07:47 PM UTC
Gaz and Peter, thanks a lot!

Peter, your Marder is coming along very nicely - I like the additional detailing and stowage. That etch does look a bit tricky.

To dust up the T-34, I was going for a multi-layered effect to increase depth. I first covered the base coat with chipping fluid and then I airbrushed on a couple shades of thinned dust-colored paint which I then mostly removed with a brush moistened with water - a type of dust wash.

Then I used oils, first dark brown for a pin wash, then three dusty shades (including light grey for an urban environment) to build up the effect, especially in nooks and crannies, and then another dark brown shade mixed with dark earth-colored pigment for a bit of a mud effect on the running gear and lower hull (not to mention a greasy black for the diesel exhaust stains).

Finally, I dusted on some pigments (a blend of light earth, dust and light grey tones, plus black for the exhaust), fixed them with thinner and after it dried, I removed some with a sponge, mainly on vertical surfaces.

Good luck to all still rushing towards the finish line!

Jerry
petbat
Visit this Community
Queensland, Australia
Member Since: August 06, 2005
entire network: 2,232 Posts
KitMaker Network: 61 Posts
Posted: Thursday, September 05, 2019 - 10:16 AM UTC
First Sergeant - Excellent work on the Sturmovik. The white finish is great.

Jerry, the T34 is splendid. Patience paid off.

I'm still chugging to the finish line. Primary build is now complete, but the etch took some time to fit....

Need to lay some paint on now. Some progress pics:


GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Thursday, September 05, 2019 - 09:18 AM UTC
Jerry,
Great job on your T-34! I really love the weathering! What did you use to give it that faded/dusty look? She's really an eye catcher.

Congratulations on completing it!

Gaz
canismalus
#465
Visit this Community
Nordrhein-Westfalen, Germany
Member Since: September 12, 2014
entire network: 357 Posts
KitMaker Network: 2 Posts
Posted: Thursday, September 05, 2019 - 07:28 AM UTC
Peter, Gazza and Mark, thank you for the compliments!

First Sergeant, that‘s a wicked-looking Sturmovik - very cool.

I‘m calling my T-34 done. I have no idea why the 76mm barrel in the first and last pictures turned out so dark, because in reality it isn‘t....I must be casting shadows. Anyway:









Gaz, thanks a lot for a great campaign, and thanks to everyone who participated!

Jerry
GazzaS
#424
Visit this Community
Queensland, Australia
Member Since: April 23, 2015
entire network: 4,201 Posts
KitMaker Network: 180 Posts
Posted: Friday, August 30, 2019 - 11:25 AM UTC
Showing up nicely First Sergeant!

You're very welcome, it was my pleasure!

Gaz